100 horse's oil-free gas compressor, in the transport of propane, butane, anhydrous ammonia and other liquefied gases, they have high efficiency. They train for the tanker truck and gas recovery applications. These single-stage, reciprocating compressor of the work in the most adverse circumstances can maximize the effectiveness and reliability, all the pressure parts are ductile iron, can resist the impact of thermal and mechanical. Their design is very easy maintenance, and all parts are easy to contact and work.
Capacity according to different models from 7 to 125CFM (11.9 to 212m ³ / h), working pressure up to 425Psia (2931Kpa).
Transportation of liquid gas compressor
Often used to transport liquid gas compressor, its efficiency is higher than that used for the transmission fluid pump. When liquid in the disposal, transport tanks and pressure vessels piping system will impede the flow of liquid, so that changes in pump, while in other devices for unloading tankers and liquefied gas, the start of all first extract.
Liquid delivery is how to achieve the
Transmission fluid compressor, the compressor can be unloaded tank between the tank and received a very small pressure differential. When the compressor piston stroke in the inhalation phase has a certain amount of high pressure gas into the dumping of ballast tank, thus making a certain amount of liquid to enter through another pipeline to the receiving tank. Liquid flow rate is usually cubic feet for each transmission of the piston displacement can be 5-6 (U.S.) gallon (670-775 l / m³) of liquid.
Liquefied gases of the gas recovery compressor
Upon the completion of the tank after the liquid delivery tank is also a large number of residual gas and liquid products, the tanks of capacity of 3% or more. Compressor to the recovery of residual product is simple, but can also be investment in the compressor to recover quickly.
Gas recovery is how to achieve the
Gas recovery is through the use of a four-way valve to achieve, and when turning the valve handle 90 °, the gas flow on the reverse, dumping the gasification tank pressure to further reduce the residual gas was further recovery, the pressure can further reduce the residual gas was further recovery to reach an economic level. Recovery of the gas was discharged into the liquid storage tank and then condensed back into liquid.
Compressor selection parameters (propane and anhydrous ammonia)
|
型号
|
速度
|
液体输送量（大约数）（1）
|
活塞排量
|
驱动马力（2）
|
管径（3）
|
|
气相
|
液相
|
|
转/分
|
美加仑/分
|
公升/分
|
立方尺/分
|
立方米/时
|
匹
|
千瓦
|
英寸
|
毫米
|
英寸
|
毫米
|
|
LB161
LB162
|
425﹡
|
49
|
186
|
8.5
|
14.4
|
3
|
2
|
1
|
25
|
2
|
50
|
|
560
|
65
|
246
|
11.2
|
19.01
|
5
|
4
|
|
715﹡
|
83
|
314
|
14.3
|
24.3
|
5
|
4
|
1¼
|
32
|
|
780
|
90
|
341
|
15.6
|
26.5
|
7.5
|
6
|
|
825﹡
|
95
|
360
|
16.5
|
28.0
|
7.5
|
6
|
|
LB361
LB362
|
495﹡
|
123
|
466
|
21.3
|
36.2
|
7.5
|
6
|
2½
|
65
|
|
540
|
134
|
507
|
23.2
|
39.5
|
10
|
7
|
|
650﹡
|
161
|
609
|
28.0
|
47.5
|
10
|
7
|
1½-2
|
38-50
|
3
|
80
|
|
780
|
194
|
734
|
33.5
|
57.0
|
15
|
11
|
|
825﹡
|
205
|
776
|
35.5
|
60.3
|
15
|
11
|
|
LB601
LB602
|
550
|
245
|
927
|
42.4
|
72.0
|
15
|
11
|
2-2½
|
50-65
|
4
|
100
|
|
640
|
285
|
1079
|
49.3
|
83.7
|
20
|
15
|
|
735﹡
|
327
|
1238
|
56.6
|
96.2
|
20
|
15
|
|
790﹡
|
351
|
1329
|
60.8
|
103.4
|
25
|
19
|
|
LB942
|
470
|
400
|
1514
|
70
|
119
|
25
|
19
|
3-4
|
76-102
|
6
|
152
|
|
565
|
480
|
1817
|
84
|
143
|
30
|
22
|
|
750
|
640
|
2422
|
112
|
190
|
40
|
30
|
|
825
|
700
|
2650
|
123
|
209
|
50
|
37
|
* Each of the corresponding maximum horsepower motor speed.
(1) throughput and system design, pipe diameter and the displacement of the valve.
(2) horsepower is based on the mild weather conditions in the transportation of liquid and gas recovery. Used only for delivery of liquid, not in the recovery of gas, horsepower can be smaller. For bad weather conditions, please contact 100 Ma after the company on behalf of horsepower requirements.
(3) If the tube length in excess of 100 feet (30 meters) at a large diameter of the specifications on the 1st.
